The M-1856 Bayonet
in Pictures

The M-1856 bayonet was designed to be used with the M-1856 Jaeger percussion musket.  In later years it was adopted for use with the M-1858 Percussion Infantry Rifle, the M-1867 Karle Rifle, and finally with the M-1856/69 Krnka Rifle.

• The Locking Ring

• The Bayonet Tip

• Bayonet Markings

• Other Views

Back to M-1856
Bayonet Main Page

Here are two views of the locking ring system that was used to fasten the bayonet to the rifle.  Such systems were common during the early 19th century.  The three step slot and ring can be seen below.

Like its predecessors, the tip of the M-1856 bayonet tapers down to a sharp point.  Also visible here are the two fullers on the outer side of the blade.  The inner side of the blade is flat.

Several factory markings can be found on M-1856 bayonets.  The bottom left picture shows a Cyrillic letter 'P' in a circle and the letters KH beside it.  The picture on the bottom right shows the mostly illegible regimental number (probably the number 10) and the serial number of the bayonet - 1201.

Here are three more views of the M-1856 bayonet.  In the top right picture you can see the flat inner fuller, markings, and bayonet cylinder.

The two pictures below show other views of the front and rear of the mounting cylinder.